Configuration
Programming Guide 23
Parameter [Ext No.2] DN
Default Blank
Value Range 3-4 digits consisting of 0-9
Description/Function Specifies the extension for B2 channel.
Notes
• This programme allows you to assign an extension number
to each Voice Mail port. Since each port connected to the
VPS provides two extensions, this enables you to assign
extension numbers to each port. To reach the Voice Mail
system, users dial these extension numbers.
• When you swap DN you already programmed among Jacks,
you must clear these DNs once.
Reference • 2.3 Numbering Plan (P/G)
Parameter [Ext No.2] Group No.
Default Blank
Value Range 1-128
Description/Function Specifies the Extension Group (1-128) to which the B2 channel of
the VPS (DPT) port is assigned.
Note
• Specifies the extension group (1-128) to which the type of
extension group, VM or AA, is assigned.
Reference • 1.3 System Features (F/G)
– Extension Group
• 3.3 Extension Group (P/G)
Parameter Status
Default —
Value Range
1. INS
2. OUS
3. FAULT
Description/Function Specifies the operating status of the VPS (DPT) port.
1. INS: The VPS port is In-Service.
2. OUS: The VPS port is Out-of-Service.
3. FAULT: The VPS port is defective.
Reference None
To Next Page
Loading...
