Line
Programming Guide 233
Parameter Data Line Mode
Default No
Value Range
1. Yes
2. No
Description/Function Assigns whether "Data Line Security mode" is available or not. If
set to "No," setting "Data Line Security mode" by dialling the
feature number is impossible.
Reference • 1.12 Conversation Features (F/G)
– Data Line Security
• 2.7.11 Protecting Your Line against Indication Tones (Data Line
Security) (U/M)
Parameter Call Waiting Tone Type
Default Tone 1
Value Range
1. Tone 1
2. Tone 2
Description/Function Specifies the type of Call Waiting Tone for PC Consoles.
Please refer to Section "5.4 What is This Tone?" in the User
Manual for detailed information on Tone Type.
Reference • 2.4.4 Answering a Call Waiting (U/M)
Parameter Call Pickup Deny
Default Disable
Value Range
1. Enable
2. Disable
Description/Function Enables or disables Call Pickup Deny mode.
Reference • 1.9 Answering Features (F/G)
– Call Pickup
• 2.7.8 Denying Other People the Possibility of Picking up Your
Calls (Call Pickup Deny) (U/M)
To Next Page
Loading...
