Features
256 Programming Guide
Parameter Message
Default MSG1: Will Return Soon, MSG2: Gone Home, MSG3: At Ext
%%%% (Extension No.), MSG4: Back at %% : %% (Hour:
Minute), MSG5: Out Until %% / %% (Month / Day), MSG6: In a
Meeting, MSG7-9: Blank
Value Range Up to 16 characters consisting of 0-9, A-Z, a-z or the following
marks: ! # $ % ( ) + , - / : ; < = > ? @ &.
Description/Function Specifies Absent Messages.
Messages 1 through 6 are programmed at the factory but can be
changed.
Note
• If "Print out Absent Message (6-9)" (Section 10.4 SMDR)
is enabled by System Programming, Absent Messages No.6
to No.9 will be printed out by SMDR when an extension user
specifies one of these messages by dialling the feature
number for "Absent Message Set / Cancel."
Reference • 1.3 System Features (F/G)
– Hotel Application
• 1.17 Display Features (F/G)
– Absent Message Capability
• 2.5.3 Showing an Absent Message on the Caller's Telephone
Display (Absent Message Capability) (U/M)
• 3.2.6 Hotel Use Features (Hotel Application) [KX-T7536, KX-
T7235 only] (U/M)
• 2.3 Numbering Plan (P/G)
– Absent Message Set / Cancel
To Next Page
Loading...
