Panasonic KX-TD500 - Page 273

Features
Programming Guide 273
Parameter Name
Default Blank
Value Range Up to 16 characters consisting of 0-9, A-Z, a-z or the following
marks: ! # $ % ( ) + , - / : ; < = > ? @ &.
Description/Function Specifies the name to a Caller ID code.
Note
• With Caller ID Service, the calling party is displayed either by
its ID Code or name. If the name display is required, use this
programme to give a name to a Caller ID code.
Reference • 2.10.1 Calling Using the Call Log (Incoming Call Log) [KX-
T7533, KX-T7536, KX-T7230, KX-T7235 only] (U/M)
Parameter Number
Default Blank
Value Range
Up to 24 digits consisting of 0-9, or #
Description/Function Specifies the identification code of the calling party (Caller ID
code) to utilise Caller ID Service.
Reference • 2.10.1 Calling Using the Call Log (Incoming Call Log) [KX-
T7533, KX-T7536, KX-T7230, KX-T7235 only] (U/M)