Panasonic KX-TD500 - Page 29

Configuration
Programming Guide 29
Parameter Card No.
Default —
Value Range XXX : E1 [ XXX : Card No. (101-314)]
Description/Function Specifies the physical number of the E1 digital trunk card which
you are going to programme.
Reference • 1.2 Slot Assignment (P/G)
Parameter Channel Type
Default Undefined
Value Range
1. Undefined
2.
DR2
3. E&M-P
4. E&M-C
Description/Function Specifies the type of E1 interface per channel.
1. Undefined: Not assigned.
2. DR2: Digital signalling system-R2
3. E&M-P: Pulsed E&M
4. E&M-C: Continuous E&M
Reference • 1.3 System Features (F/G)
– E1 Carrier
Parameter Group No.
Default Blank
Value Range 1-48
Description/Function Specifies the Trunk Group (1-48) to which the E1 port is assigned.
Reference • 1.3 System Features (F/G)
– Trunk Group
• 3.2 Trunk Group (P/G)