Panasonic KX-TDA50

4.7 Configuration [1]
Feature Guide 345
Programming References
None
Feature Guide References
2.1.1 Extension Port Configuration
Parallel Telephone Ringing (for S-Hybrid port)
Specifies whether a sub telephone (SLT) rings at the same time with the main telephone (DPT) for an
incoming call.
Default
Yes
Value Range
Yes, No
Programming References
None
Feature Guide References
1.10.9 Paralleled Telephone
PT Property—Type (for DPT, APT, S-Hybrid, or Hybrid port)
Selects the port type.
To change the port type of an extension port, follow the steps below:
1. Set the status of the extension port to "OUS".
2. Change the port type of the extension port, then click Apply.
3. Set the status of the extension port to "INS".
When changing the port type of an extension port for which Wireless XDP has been set on the 4.10.1
Wired Extension—Extension Settings [4-1-1] screen, the Wireless XDP setting must be deleted
first.
Default
Normal
Value Range
Normal: For connecting a PT
DSS: For connecting a DSS Console (A maximum of 4 DSS Consoles can be connected to the PBX.)
VM (DPT): For connecting a Panasonic VPS through DPT Integration
PC Console (not available with the APT and Hybrid port): For connecting a PC Console (A maximum of 2
PC Consoles can be connected to the PBX.)
Programming References
4.7.14 Extension Port [1-5] Port Command