Panasonic KX-TDA50

4.10 Extension [4]
492 Feature Guide
Programming References
None
Feature Guide References
2.1.1 Extension Port Configuration
Telephone Type
Indicates the type of telephone connected to the extension port (reference only).
Default
Current connected telephone type
Value Range
DPT(T76xx): KX-T7600 series DPT is connected.
DPT(Other): DPT other than KX-T7600 series is connected.
APT: APT is connected.
DSS: DSS Console is connected.
VM: VPS is connected.
SLT: SLT is connected (or no telephone is connected to the Super Hybrid, Hybrid or SLT port).
CS: CS is connected.
No Connection: No telephone is connected.
Feature Guide References
None
Wireless XDP
Specifies the extension number of the PS with which Wireless XDP Parallel Mode is established. To enable
Wireless XDP Parallel Mode, the PS must be turned off once and then turned on after assigning this setting.
When changing the port type of an extension port in PT Property—Type (for DPT, APT, S-Hybrid, or
Hybrid port) on the 4.7.13 Extension Port [1-5] screen, the Wireless XDP setting must be deleted first.
Default
Not stored.
Value Range
Max. 4 digits (consisting of 0–9)
Programming References
None
Feature Guide References
1.20.3 Wireless XDP Parallel Mode
Extension Group
Specifies the extension group to which the extension belongs. The extension group is used to compose call
pickup groups and paging groups.