Panasonic KX-UTG200

Value Range
• Y/Yes (Repeat)
• N/No (No Repeat)
Default Value
Y
CW_TONE1_TIMING
Value Format Comma-separated Integer
Description Specifies the pattern, in milliseconds, of call waiting tone 1 using up to
10 whole numbers (on 1, off 1, on 2, off 2…) separated by commas.
Value Range 0–16000 (0: Infinite time)
Note
• Avoid setting 1–50 for any of the values.
Default Value 120,120,120,120,120,14400
BELL_CORE_PATTERN1_TIMING
Value Format Comma-separated Integer
Description Specifies the cadence, in milliseconds, of pattern ID 1, described in the
LSSGR, GR-506-CORE, "Signaling for Analog Interfaces" section 14,
using up to 8 whole numbers (on 1, off 1, on 2, off 2…) separated by
commas.
Value Range 0–5000 (0: Infinite time)
Note
• Avoid setting 1–50 for any of the values.
Default Value 2000,4000
BELL_CORE_PATTERN2_TIMING
Value Format Comma-separated Integer
Description Specifies the cadence, in milliseconds, of pattern ID 2, described in the
LSSGR, GR-506-CORE, "Signaling for Analog Interfaces" section 14,
using up to 8 whole numbers (on 1, off 1, on 2, off 2…) separated by
commas.
Value Range 0–5000 (0: Infinite time)
Note
• Avoid setting 1–50 for any of the values.
Default Value 800,400,800,4000
310 Administrator Guide Document Version 2015-01
5.6.8 Tone Settings