Icon Description
Indicates a BLF flexible button is subscribing.
Indicates a BLF flexible button is idle.
Indicates a BLF flexible button is busy.
Indicates a BLF flexible button is alert.
Indicates a call with BLF flexible button is parked.
Using Flexible Buttons with the KX-UTA336 Add-on Key Module
(KX-UTG300 only)
The optional KX-UTA336 (also referred to as "KEM") allows 36 additional flexible buttons (3 pages of 12) to
be used with the KX-UTG300. The available flexible buttons (® see Page 375) and their icons (® see
Page 375) are the same as for the unit. The flexible buttons for the KX-UTA336 can be programmed either
through the Web user interface (® see 4.6.4 Flexible Button Settings (KEM) (KX-UTG300 only)) or by
configuration file programming (® see 5.6.10 KEM1 (KX-UTA336 Add-on Key Module 1) Button
Settings and 5.6.11 KEM2 (KX-UTA336 Add-on Key Module 2) Button Settings).
6.3.1 Flexible Button Settings
To set Flexible Buttons
1. In the Web user interface, click the [Telephone] tab, and then click [Flexible Button Settings].
2. Enter settings as described in the following table.
Button
Parameter
Description Value
One-Touch Phone Number Up to 32 digits
BLF Extension Number
*1
Up to 32 digits
*1
You can also assign extension numbers automatically to BLF buttons using the information in the server's resource list without having
to input information here.
Note
• For details about configuring these settings by configuration file programming, see 5.6.9 Flexible
Button Settings.
376 Administrator Guide Document Version 2015-01
6.3.1 Flexible Button Settings
To Next Page
Loading...
