Parker 591C - Page 221

C-10 Parameter Specification Tables 590 Series DC Digital Drive
Tag Mn Function Block Name Parameter Name Minimum Maximum Default Units Range Notes
175 ev FIELD CONTROL EMF LEAD 0.10 50.00 2.00 V0 W0
176 ew FIELD CONTROL EMF LAG 0.00 200.00 40.00 V0 W0
177 ex FIELD CONTROL EMF GAIN 0.00 100.00 0.30 V0 W0
178 ey FIELD CONTROL MAX VOLTS 0.00 100.00 100.00 % V0 W0
179 ez FIELD CONTROL MIN FLD.CURRENT 0.00 100.00 90.00 % V0 W1
180 f0 ALARMS SPDFBK ALM LEVEL 0.0 100.0 50.0 % V1 W0
181 f1 FEEDBACKS UNFIL.FIELD FBK 0.00 0.00 0.00 % V0 W4
182 f2 CALIBRATION FIELD I CAL. 0.9800 1.1000 1.0000 V0 W0
183 f3 FIELD CONTROL FIELD DEMAND 0.00 0.00 0.00 % V1 W4
184 f4 FIELD CONTROL FLD.FIRING ANGLE 0.00 0.00 0.00 DEG V1 W4
185 f5 FIELD CONTROL FLD.QUENCH DELAY 0.0 600.0 0.0 s V1 W0
186 f6 FIELD CONTROL FLD. QUENCH MODE 0 1 0 0: QUENCH
1: STANDBY
V1 W0
187 f7 5703 IN RAW INPUT 0.00 0.00 0.00 % V0 W4
189 f9 5703 IN SCALED INPUT 0.00 0.00 0.00 % V0 W4
191 fb FIELD CONTROL BEMF FBK LEAD 10 5000 100 V0 W0
192 fc FIELD CONTROL BEMF FBK LAG 10 5000 100 V0 W0
195 ff DIGITAL OUTPUT 1 THRESHOLD (>) -300.00 300.00 0.00 % V0 W0
196 fg DIGITAL OUTPUT 2 THRESHOLD (>) -300.00 300.00 0.00 % V0 W0
197 fh DIGITAL OUTPUT 3 THRESHOLD (>) -300.00 300.00 0.00 % V0 W0
198 fi SYSTEM PORT (P3) BAUD RATE 0 9 5 0: 300
1: 600
2: 1200
3: 2400
4: 4800
5: 9600
6: 19200
7: 38400
8: 57600
9: 115200
V0 W0
201 fl CURRENT LOOP REGEN ENABLE 0 1 1 0: 2Q (NON-REGEN)
1: 4Q (REGEN)
V0 W1
202 fm SPEED LOOP INT. DEFEAT 0 1 0 0: OFF
1: ON
V1 W0
203 fn INVERSE TIME INVERSE TIME O/P 0.00 0.00 0.00 % V1 W4
206 fq ENCODER 1 ENCODER 0 0 0 RPM V0 W4
207 fr FEEDBACKS SPEED FEEDBACK 0.00 0.00 0.00 % V0 W4
208 fs SETPOINT SUM 1 RATIO 0 -3.0000 3.0000 1.0000 V0 W0
209 ft FIELD CONTROL FLD.CTRL MODE 0 1 0 0: VOLTAGE CONTROL
1: CURRENT CONTROL
V0 W1