Service Manual 13 Errors
13.3 Error symbols
1/09 PERFECTA 115 / 132 / 168 / 225 – TS 97
PERFECTA Schneidemaschinenwerk GmbH D-02625 Bautzen Schäfferstr. 44 Tel.: +49-3591-556-131 to -133 Fax: +49 3591-556-139
13.3 Error symbols
Symbols Indicating
The AWR table is not closed.
Communication with control module interrupted.
Communication with safety module interrupted.
Desired measurement is not identical with actual measurement.
The lubrication counter has elapsed.
The knife is not at its normal position.
The main motor is OFF.
The machine is not calibrated.
The safety light guard is interrupted.
The knife change counter has elapsed.
Side alignment error.
APS control error.
Backgauge disabled.
To Previous Page
Loading...