10 GENERAL INFORMATION
Safety
Viton seals
Some seals used in engines and in components
fitted to engines are made of Viton.
Viton is used by many manufacturers and is a safe
material under normal conditions of operation.
If Viton is burned, a product of this burnt material is
an acid which is extremely dangerous. Never allow
this burnt material to come into contact with the
skin or with the eyes.
If it is necessary to come into contact with
components which have been burnt, ensure that
the precautions which follow are used:
• Ensure that the components have cooled.
• Use Neoprene gloves and discard the gloves
safely after use.
• Wash the area with calcium hydroxide solution
and then with clean water.
• Disposal of components and gloves which are
contaminated must be in accordance with local
regulations.
If there is contamination of the skin or eyes, wash
the affected area with a continuous supply of clean
water or with calcium hydroxide solution for 15-60
minutes. Obtain immediate medical attention.
10.08 Perkins Phaser/1000 Series, April 1995
To Next Page
Loading...
