Perkins Phaser Series - Fuel Filter Canister; To Renew

FUEL SYSTEM 20B
Fuel filter canister
To renew20B-01
Caution: It is important that only the correct
genuine Perkins fuel filter canister is used. The use
of a wrong canister can damage the fuel injection
pump.
1 Thoroughly clean the outside surfaces of the fuel
filter assembly.
2 Use a strap wrench or similar tool to loosen the
filter canister and remove the canister.
3 Ensure that the threaded adaptor (A1) is secure
in the filter head and that the inside of the head is
clean.
4 Lightly lubricate the seal of the new canister with
clean fuel. Fit the new canister to the filter head
and tighten by hand only.
5Eliminate the air from the fuel filter, operation
20B-08
a a a
a
a
a
a
a
a
a a a
1
PA202
Perkins Phaser/1000 Series, April 1995 20B.03