Perkins Phaser Series - FUEL SYSTEM

RECOMMENDED TORQUE TENSIONS 11B
Description
Thread
size
Torque
Nm lbf ft kgf m
Auxiliary equipment
Nut, compressor drive gear:
- 6,4 mm (0.25 in) thick 3/4 UNF 80 59 8,2
- 10 mm (0.4 in) thick 3/4 UNF 130 95 13,3
Nuts for gears of auxiliary drive assembly:
- 6,4 mm (0.25 in) thick 3/4 UNF 80 59 8,2
- 10 mm (0.4 in) thick 3/4 UNF 130 95 13,3
Nut for gears of auxiliary drive assembly M20 130 95 13,3
Perkins Phaser/1000 Series, April 1995 11B.05