GENERAL INFORMATION 10
POWERPART consumable products
Perkins have made available the products
recommended below in order to assist in the
correct operation, service and maintenance of your
engine and your machine. The instructions for the
use of each product are given on the outside of
each container. These products are available from
your Perkins distributor.
POWERPART Antifreeze
Protects the cooling system against frost and
corrosion. Part number 1 litre 21825166 or 5 litres
21825167, see the User's Handbook.
POWERPART Easy Flush
Cleans the cooling system. Part number 2182501
POWERPART Jointing compound
Universal jointing compound which seals joints.
Currently Hylomar. Part number 1861155 or
1861117.
POWERPART Silicone rubber sealant
Silicone rubber sealant which prevents leakage
through gaps. Currently Hylosil. Part number
1861108.
POWERPART Lay-Up 1
A diesel fuel additive for protection against
corrosion. Part number 1772204, see the User's
Handbook.
POWERPART Lay-Up 2
Protects the inside of the engine and of other
closed systems. Part number 1762811, see the
User's Handbook.
POWERPART Lay-Up 3
Protects outside metal parts. Part number 1734115,
see the User's Handbook.
POWERPART Chisel
Allows easy removal of old gaskets and joints.
Currently Loctite Chisel. Part number 21825163.
POWERPART Repel
Dries damp equipment and gives protection against
corrosion. Passes through dirt and corrosion to
lubricate and to assist removal of components.
Currently Loctite Repel. Part number 21825164.
POWERPART Threadlock
To retain small fasteners where easy removal is
necessary. Currently Loctite 222e. Part number
21820222.
POWERPART Nutlock
To retain and seal threaded fasteners and cup
plugs where easy removal is necessary.
Currently Loctite 242e. Part number 21820242
POWERPART Studlock
To permanently retain large fasteners and studs.
Currently Loctite 270. Part number 21820270.
POWERPART Liquid gasket
To seal flat faces of components where no joint is
used. Especially suitable for aluminium
components. Currently Loctite 518. Part number
21820518
POWERPART Threadlock (hydraulic/pneumatic)
To retain and seal pipe connections with fine
threads. Especially suitable for hydraulic and
pneumatic systems. Currently Loctite 542. Part
number 2180542
POWERPART Threadlock (pipe)
To retain and seal pipe connections with coarse
threads. Pressure systems can be used
immediately. Currently Loctite 575. Part number
21820575.
POWERPART Retainer (oil tolerant)
To retain components which have a transition fit.
Currently Loctite 603. Part number 21820603.
POWERPART Retainer (high strength)
To retain components which have an interference
fit. Currently Loctite 638. Part number 21820638.
Perkins Phaser/1000 Series, April 1995 10.09
To Next Page
Loading...
