16 CYLINDER BLOCK ASSEMBLY
Partially finished liner
Inside diameter of partially finished liner . . . . . . . . . . . . . . . . . . . 99,162/99,415 mm (3.9040/3.9139 in)
Interference fit of partially finished liner in parent bore . . . . . . . . . . . . 0,025/0,076 mm (0.003/0.001 in)
Hone angle (cross hatch) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30°/35°
Final finish grade, silicon carbide (Plateau hone) . . . . . . . . . . . . . . . . . . . . . . . . 0,65/1,3 micrometers
Inside diameter of finished liner . . . . . . . . . . . . . . . . . . . . . . . . . . 100,00/100,03 mm (3.937/3.938 in)
16A.14 Perkins Phaser/1000 Series, April 1995
To Next Page
Loading...
