7 General
Installation manual for PMC tendo DD5/PMCprimo Drive3 Page 13
7.4 Instrument description
7.4.1 Package supplied
When you order an amplifier from the series PMCtendo DD5 resp. PMCprimo Drive3, you will
receive:
• Mating connectors X0, X3, X4, X8, X9 (only 230V amplifiers)
• Assembly, Installation and Setup instructions
• Setup software PMCprimo Motion Control Tools on CD-ROM
• User manual PDrive and PMCprimo programming manual on CD-ROM
7.4.2 Common accessories
• Synchronous servomotor of the series PMCtendo AC1, PMCtendo AC2 or PMCtendo AC3
• Motor cable (prefabricated), or both power connectors separately, with the motor cable as a
cut-off length
• Feedback cable (prefabricated) or both feedback connectors separately, with the feedback
cable as a cut-off length
• External regen resistor
• Motor choke
• Line filter curve “B”
• Communication cable to the PC for setting parameters from a PC
7.4.3 Accessories for PMCprimo Drive3
• MODBUS panel (PMI series) and communication cable
• CAN cables (different length available)
• Software keys for Motion Generator, Soft-PLC or CNC functionality
• Ethernet cabel
• Adapter cabel Modbus/Profibus
• PMCprimo expansion board (see page 109)
• CompactFlash cards
• Profibus DP Slave Interface (Profibus-IC)
• Master encoder
To Next Page
Loading...
Need help?
General
