Polaris 2003 Pro X User Manual

ENGINE
2.26
Disassembly, Cont.
13. Remove bolts and separate case halves. Keep
bolts in order for assembly.
14. To prevent damage to snap-ring grooves, lift
crankshaft straight upward and out of lower case.
15. Tap out the drive shaft using a center punch and
hammer. Locate the center punch in the centering
hole on the oil pump end of the shaft. Be careful not
to damage the bearing. This will remove the oil seal
and the mechanical seal from the crankcase.
Enfocus Software - Customer Support

Polaris 2003 Pro X Specifications

General

Brand	Polaris
Model	2003 Pro X
Category	Offroad Vehicle
Language	English