Appendix C
A-100
Unzipping 4088XXXZ.EXE produces several files, including:
!
4088.EXE
!
PLXXXZ.EXE
NOTE:
PLXXXZ.EXE is a zipped file containing the file PL.EXE. It should be
unzipped by typing PLXXXZ (substituting the correct version number for the
Xs) and pressing
ENTER
before continuing.
5. From the DDF directory run PolyLink by entering PL and pressing
ENTER
.
NOTE:
If using a DDF3088, complete the following steps:
!
Use the HCOM utility to delete all unnecessary files from the C:\T
directory. (For instructions on using HCOM, refer to the text file
HCOM.TXT on the Polysonics Bulletin Board System [BBS] or on the
PlantCom Utility Software diskette.)
!
Use HCOM to transfer PL.EXE and 4088.EXE to the C:\T directory.
!
Exit HCOM by pressing the
ESC
key on the DDF3088.
!
Run PolyLink on the DDF3088 by completing steps 6 through 12 in
Section A.2.2.
The PolyLink welcome screen is displayed.
NOTE:
If the units have trouble connecting, refer to the connection information
following step 9 in Section A.2.1.
6. Press
ENTER
again to display the VT100 screen.
To Next Page
Loading...
Need help?
General