Appendix C
A-104
8. Go to the DDF directory.
NOTE:
To go to the DDF directory, enter the following commands one at a time,
pressing
ENTER
after each one:
C:
CD\
CD DDF
9. Unzip 4088XXXZ.EXE by typing the file name 4088XXXZ (without the extension)
and pressing
ENTER
. (Substitute the correct version number for the Xs).
NOTE:
A message may be displayed during the unzipping process indicating that a
file with the same name already exists. Enter
Y
(for yes) for permission to
overwrite the file and press
ENTER
whenever this occurs.
Unzipping 4088XXXZ.EXE produces several files, including:
!
UPGR4088.BAT
!
COMM.EXE
!
SELECTKB.EXE
!
STARTUP.BAT
!
4088.EXE
NOTE:
If using a DDF3088, complete the following steps:
!
Use the HCOM utility to delete all unnecessary files from the C:\T
directory. (For instructions on using HCOM, refer to the text file
HCOM.TXT on the Polysonics Bulletin Board System [BBS] or on the
PlantCom Utility Software diskette.)
!
Use HCOM to transfer the unzipped files listed above to the C:\T directory.
!
Exit HCOM by pressing the
ESC
key on the DDF3088.
!
Enter the following commands, pressing
YES
(
ENTER
) after each one, to
go to the C:\T directory of the DDF3088:
CD\
CD\T
To Next Page
Loading...