Promise Technology VessRAID 1740s - Managing Enclosures; Viewing the Enclosure; Locating an Enclosure

VessRAID 1740s, 1840s Product Manual
86
Managing Enclosures
On VessRAID, enclosures include the main VessRAID subsystem or Head Unit
as well as VessJBOD enclosures that are connected through expansion.
Enclosure Management includes the following functions:
• Viewing the Enclosure (page 86)
• Locating an Enclosure (page 86)
• Viewing Enclosure Topology (page 87)
• Viewing Enclosure Information (page 88)
• Making Enclosure Settings (page 88)
• Viewing FRU VPD Information (page 88)
• Checking the Battery (page 89)
• Reconditioning a Battery (page 90)
• Silencing the Buzzer (page 90)
• Making Buzzer Settings (page 90)
• Testing the Buzzer (page 91)
Viewing the Enclosure
To view information about the enclosures:
1. Click the Subsystem icon in Tree View.
2. Click the Enclosures icon.
The following information is shown:
• Enclosure ID number
• Enclosure Type
• Operational Status
• Status Description (specific components in need of attention, if any)
Locating an Enclosure
To locate an enclosure (subsystem):
1. Click the Subsystem icon in Tree View.
2. Click the Enclosures icon.
3. Click the Locate Enclosure button.
The disk status LEDs and the LEDs on the back of the enclosure blink for
one minute. See the Figures below.