VessRAID 1740s, 1840s Product Manual
132
Managing the Enclosure
Enclosure Management includes the following functions:
• Viewing Enclosure Information (page 132)
• Viewing Power Supply Status (page 132)
• Locating a Power Supply (page 133)
• Viewing Cooling Unit Status (page 133)
• Viewing Voltage Sensor Status (page 133)
• Viewing Temperature Sensor Status (page 133)
• Setting Temperature Thresholds (page 134)
• Checking the Batteries (page 134)
• Reconditioning a Battery (page 135)
• Locating an Enclosure (page 135)
• Viewing Enclosure Topology (page 136)
Viewing Enclosure Information
Enclosure Management includes information, status, settings and location. To
access Enclosure Management:
1. From the Main Menu, highlight Subsystem Management and press Enter.
2. Highlight Enclosure Management and press Enter.
To access FPU VPD information (vital product data on field replaceable units),
highlight FPU VPD Information and press Enter.
This function lists the battery backup unit and backplane.
Viewing Power Supply Status
To view the status of the power supplies:
1. From the Main Menu, highlight Subsystem Management and press Enter.
2. Highlight Enclosure Management and press Enter.
3. Highlight Power Supply Units and press Enter.
The screen displays the status of VessRAID’s power supply. If any status
differs from Powered On and Functional, there is a power supply
malfunction. See “Replacing a Power Supply” on page 208.
To Next Page
Loading...