39
Chapter 4: Management with WebPAM PROe
This chapter covers the following topics:
• Logging into WebPAM PROe (page 40)
• Perusing the Interface (page 42)
• Working with the Storage Network (page 47)
• Working with Subsystems (page 48)
• Managing Users (page 58)
• Managing the Network Connection (page 63)
• Managing SAS Connections (page 64)
• Managing Storage Services (page 66)
• Managing Software Services (page 69)
• Exporting the User Database (page 76)
• Importing a User Database (page 76)
• Importing a Configuration Script (page 77)
• Updating the Firmware (page 78)
• Viewing Flash Image Information (page 78)
• Restoring Factory Defaults (page 79)
• Clearing Statistics (page 79)
• Shutting Down the Subsystem (page 80)
• Restarting the Subsystem (page 81)
• Managing the Controller (page 82)
• Managing Enclosures (page 86)
• Managing Physical Drives (page 92)
• Managing Disk Arrays (page 98)
• Managing Logical Drives (page 111)
• Managing Spare Drives (page 117)
• Working with the Logical Drive Summary (page 121)
For information about VessRAID’s audible alarm and LEDs, see “Chapter 9:
Troubleshooting” on page 251.