Perusing the Interface
185
Advanced Mode
Advanced Mode enables you to perform the Simple Mode functions, plus:
• View Enclosure – View overall enclosure status. Also view individual status
of temperature, fan, power supply, and voltage
• Physical Drive Management – View PD ID, model, interface, capacity,
location (enclosure and slot number), configuration (array and sequence
number), firmware version, status; Locate physical drive
• Logical Disk Management – View LD ID, capacity, RAID level, write cache,
stripe size, sector size, disk array ID, status; Locate logical drive
Limitations
The LCD panel does not perform these functions:
• Setting enclosure date and time
• Clearing a Stale or PFA condition from a physical drive
• Creating a revertible spare drive or a dedicated spare drive
• Running background activity, such as Media Patrol, PDM, Rebuild, or RAID
level migration
• Viewing event logs
• Shutting down or restarting the VessRAID
Refer to “Chapter 4: Management with WebPAM PROe” on page 39 and
“Chapter 5: Management with the CLU” on page 123 when you need to perform
these functions.
Viewing Events
The LCD panel reports events with a severity of Warning, Minor, Major, Critical, or
Fatal. See “Setting-up User Event Subscriptions” on page 59 for a description of
the severity levels.
To view events:
1. Press the or button until the display says View Events.
2. Press the button and the display the first critical event.
• Press the button to display more information about the event.
• Press the or button to scroll through any additional events.
To Next Page
Loading...
Need help?
General
