Promise Technology VessRAID 1740s User Manual

Chapter 4: Management with WebPAM PROe
45
Using Management View
Management View provides the actual user interface with the VessRAID,
including creation, maintenance, deletion, and monitoring of disk arrays and
logical drives.
Function Tabs control specific actions and processes. This window changes
depending on which item you choose in Tree View and which tab you choose in
Management View itself.
Click the Help button in Management View to access online help for the function
that is currently displayed.
Viewing the Event Frame
To view the Event Frame:
1. Click View in the Header.
2. Click the Show Event Frame popup option.
The VessRAID user interface will display the Event Frame below
Management View.
3. Click View again to hide the Event Frame.
In the event frame, events are listed and sorted by:
• Item Number – A consecutive decimal number assigned to a specific event
• Device – Battery, controller, logical drive, physical drive, port, etc.
• Event ID – The hexadecimal number that identifies the specific type of event
• Severity – Information, Warning, Minor, Major, Critical, and Fatal. The
severity level is user-specified. See “Setting-up User Event Subscriptions”
on page 59.
• Time – Time and date of the occurrence
• Description – A brief description of the event
Sorting Events
You can sort the events by Item Number, Device, Event ID, Severity, Time and
Date, or Description.
Click the link at the top of the column by which you want to sort the events. After
you click the item, a triangle icon appears.
• If the triangle points upward, the column is sorted low-to-high or old-to-new.
• If the triangle points downward, the column is sorted high-to-low or new-to-
old.

Promise Technology VessRAID 1740s Specifications

General

Brand	Promise Technology
Model	VessRAID 1740s
Category	Network Storage Server
Language	English