Promise Technology VessRAID 1740s User Manual

VessRAID 1740s, 1840s Product Manual
78
The new configuration is applied to this VessRAID subsystem.
Updating the Firmware
See “Chapter 7: Maintenance” on page 203 for instructions.
Viewing Flash Image Information
Flash image information refers to the package of firmware components running
on your VessRAID controller or controllers, including:
• Component name
• Version number
• Build date
• Flash (installation) date
• Controller number (1 or 2)
To view flash image information:
1. Click the Subsystem icon in Tree View.
2. Click the Administrative Tools icon.
3. Click the Software Management icon.
4. Click the Image Version tab.
The flash image information displays on the screen.
Running Image Info – The firmware package currently running on the
controllers
Flashed Image Info – The firmware package flashed to memory
If the Running and Flashed Images do not match, the VessRAID has not
restarted since the firmware was last updated. Restart the VessRAID to run the
Flashed firmware package. See “Restarting the Subsystem” on page 81.
Note that all of these components are upgraded together in a package. See
“Updating the Firmware in WebPAM PROe” on page 203.
Note
The Decryption box is grayed out. Decryption is disabled for
configuration scripts.

Promise Technology VessRAID 1740s Specifications

General

Brand	Promise Technology
Model	VessRAID 1740s
Category	Network Storage Server
Language	English