Promise Technology VessRAID 1740s User Manual

VessRAID 1740s, 1840s Product Manual
192
For other logical drive functions, see “Managing Logical Drives” on page 111
(WebPAM PROe) or page 154 (CLU).
Creating a Disk Array – Automatic
The Disk Array Automatic Creation option enables you to create a new disk array
following a default set of parameters. One logical drive will be made automatically
when you create the disk array.
If you have multiple enclosures, a separate disk array and logical drive set will be
created for each enclosure.
If you have both Hard Disk Drives (HDD) and Solid State Drives (SSD), separate
disk array and logical drive sets will be created for your HDDs and for your SSDs.
These two drive types cannot be mixed in the same disk array.
Creating
To create a disk array automatically:
1. Press the or button until the display says Array Configure.
2. Press the button and the display says Auto Configure.
3. Press the button again and the display says Are you sure?
4. Press the button so the display says Yes.
5. Press the button to input your answer.
6. Press the button again to confirm.
The display shows the array, logical drive, and spare drive creation process.
Verifying
To verify the results of the automatic disk array creation:
1. From the default screen, press the or button until the display says
Logical Disk Management.
2. Press the button and the display says 000.
3. Press the button again to choose this logical drive.
4. From the default screen, press the or buttons to scroll through the
information for the logical drive.

Promise Technology VessRAID 1740s Specifications

General

Brand	Promise Technology
Model	VessRAID 1740s
Category	Network Storage Server
Language	English