Promise Technology VessRAID 1740s User Manual

Chapter 5: Management with the CLU
165
A SAS initiator name is the SAS address of the HBA card in the Host PC.
Obtain the initiator name from the initiator utility on your host system.
Note that the initiator name you input must match exactly in order for the
connection to work.
5. Press Ctrl-A to save the initiator.
Mapping a LUN to an Initiator
You must add an initiator to the VessRAID’s initiator list in order to use the
initiator to create a LUN. You can add initiators under SAS Management, see
page 159, or under “Creating an Initiator” on page 164.
To map a LUN to an initiator:
1. From the Main Menu, highlight Additional Info and Management and press
Enter.
2. Highlight LUN Mapping and press Enter.
3. Highlight an existing Initiator and press Enter.
A list of logical drives displays.
4. In the LUN field, press the backspace key to erase the current value, then
type the LUN you want to assign to this initiator, from 0 to 255.
If you make a error, press Ctrl-R to restore the current LUN.
5. Press Ctrl-A to save the LUN map.
Deleting an Initiator
To delete an initiator:
1. From the Main Menu, highlight Additional Info and Management and press
Enter.
2. Highlight LUN Mapping and press Enter.
3. Highlight the initiator you want to delete and press the spacebar to mark it.
The mark is an asterisk (*) to the left of the listing.
4. Highlight Delete Marked Initiators and press Enter.
5. Press Y to confirm the deletion.
Note
LUN Mapping must be enabled in order for VessRAID to
recognize the initiator.

Promise Technology VessRAID 1740s Specifications

General

Brand	Promise Technology
Model	VessRAID 1740s
Category	Network Storage Server
Language	English