Promise Technology VessRAID 1740s User Manual

VessRAID 1740s, 1840s Product Manual
80
Shutting Down the Subsystem
You can only do part of this function in WebPAM PROe. Additional action is
required, as described below. To shutdown the subsystem:
1. Click the Subsystem icon in Tree View.
2. Click the Administrative Tools icon.
3. Click the Shutdown link in Management View.
A Shutdown or Restart tab will appear.
4. On the Shutdown or Restart tab, choose Shutdown from the dropdown
menu.
5. Click the Submit button.
6. In the confirmation box, type the word confirm in the field provided.
7. Click the OK button.
When the controller shuts down, your WebPAM PROe connection will be
lost.
8. Wait for no less than two minutes.
9. Manually turn off the power supply switch (both switches on the 1840s
model) on the back of the subsystem.
Monitoring the Shutdown
To monitor a shutdown, you must use the Command Line Interface (CLI) though
a serial connection to the VessRAID.
At the “administrator@CLI>” prompt, type shutdown -a shutdown.
When the “Shutdown complete. It is now safe to power off the subsystem.”
message appears, turn off the power supply switch (both switches on the 1840s
model) on the back of the subsystem.
Caution
After you turn the power supply switches off, you must wait at least
10 seconds before you turn the power switches on again.
Caution
After you turn the power supply switches off, you must wait at least
10 seconds before you turn the power switches on again.

Promise Technology VessRAID 1740s Specifications

General

Brand	Promise Technology
Model	VessRAID 1740s
Category	Network Storage Server
Language	English