ProSoft Technology PLX51-PBM User Manual

PLX51-PBM Diagnostics
PROFIBUS DPV0/DPV1 Master or Slave to EtherNet/IP™ or Modbus® Gateway User Manual
ProSoft Technology, Inc. Page 168 of 196
Slave Status
The PLX51-PBM Slave mode diagnostics tab displays the following parameters.
Figure 8.14 – PLX51-PBM (Slave Mode) Status monitoring
Table 8.6 - Parameters displayed in the Status Monitoring – Slave Status Tab
Parameter
Description
BAUD Rate
Current BAUD rate of the PROFIBUS Network
Auto-BAUD
If the BAUD rate for the PROFIBUS Network will be automatically detected
CLEAR Op-Mode
If the operational state of the PROFIBUS Network is CLEAR
Comms State
OK
All configured slaves are operating correctly.
Failure
At least one of the configured devices are not operating correctly.
Slave Count
Number of slaves configured
Last Response Time
The time it took (in microseconds) to respond to the last request from a DP
Master.
Max Response Time
The maximum time it took (in microseconds) to respond to a request from a
DP Master.
Min Response Time
The minimum time it took (in microseconds) to respond to a request from a
DP Master.

ProSoft Technology PLX51-PBM Specifications

General

Brand	ProSoft Technology
Model	PLX51-PBM
Category	Gateway
Language	English