I
Safety Regulations for the Laser Printer PP 4050 / PP
4060 and the intelligent Paper Stacker iPS 4050E
The LED printer PP 4050/PP4060 and the intelligent Paper Stacker iPS
4050E fulfils the safety regulations according to IEC 60950-1 for information
technology equipments.
Note: The commercial name of the iPS 4050E is iPS 4050).
The mains cable must be connected to a ground protected wall-socket. The
printer's voltage has to be in accordance with the local mains voltage.
The power plug must be easily accessible at any time so that it can be
disconnected immediately in case of danger or for maintenance purposes.
Before installing the printer, check the surrounding conditions in which the
printer is intended to be used (see next page, Operating Environment).
During thunderstorm you should never attempt to connect or disconnect any
data transfer cable.
The power supply should only be opened and checked by authorized
personnel. Maintenance beyond the descriptions of chapter 5 may only be
attempted by authorized personnel. Repairs done inappropriately may seriously
jeopardize the user's safety.
Attention:
This symbol is standing for a hot surface -
danger
of burning!
Mantenimiento Periféricos Informáticos SL C/Canteras, 15 28860 Paracuellos de Jarama Tel: 00 34 917481604 WEB: https://mpi.com.es
To Next Page
Loading...