Page 2
About the
Ultra Twin
Ultra Twin has two independent points of measurement, the wallmount
model provides a dedicated display to each point of measurement, whilst the
fascia model, whilst in RUN, will show detail of one point of measurement
in the main display line, with the second point being displayed on the
auxillary display line. In both models the display will provide information
relevant to the point of measurement selected whilst in RUN and
PROGRAM mode.
Ultra Twin combines premium specification with high performance in a
most versatile system which is quickly configurable offering a choice of
applications in any combination, between the two points of measurement, of
three specific applications i.e. level or volume measurement, pump control
or flow measurement.
Functional Description
Ultra Twin sends a transmit pulse to the transducer(s), which emits an
ultrasonic pulse perpendicular to the transducer face, and the returned echo
is sent back to the Ultra Twin. The time taken to receive the echo is
measured and the distance from the transducer face to the surface being
monitored is calculated.
To Next Page
Loading...
