Pulsar ULTRA TWIN User Manual

Page 146
Conversion
P1 or P2
P1-600, P2-600 Vessel Shape
This parameter determines which vessel shape is used when utilising
“Volume Conversion”.
The choices are as shown in the table below, along with the dimensions that
are required to be entered (P1-601 to 603, P2-601 to 603).
Vessel Shape
P600 Value
Dimensions
Required
P1-600, P2-600 = 0
Cylindrical Flat
base (Default)
Cylinder diameter
P1-600, P2-600 = 1
Rectangular Flat base
Width and Breadth
P1-600, P2-600 = 2
Cylindrical Cone base
Cylinder diameter
and height of
bottom
P1-600, P2-600 = 3
Rectangular Pyramid
base
Width and Breadth
of rectangular
section and height
of bottom
P1-600, P2-600 = 4
Cylindrical Parabola
base
Cylinder diameter
and height of
bottom
P1-600, P2-600 = 5
Cylindrical Half-
sphere base
Cylinder Diameter
P1-600, P2-600 = 6
Cylindrical Flat
sloped base
Cylinder diameter
and height of
bottom

Pulsar ULTRA TWIN Specifications

General

Brand	Pulsar
Model	ULTRA TWIN
Category	Measuring Instruments
Language	English