Pulsar ULTRA TWIN - Device Comm; RS232 Set up; RS 485 Set up (Optional)

Page 191
P*979 End Month
This parameter is used to select the month, in which Daylight Saving Time
will end.
Option
Description
1= January
DST will end during the month of January
2= February
DST will end during the month of February
3= March
DST will end during the month of March
4= April
DST will end during the month of April
5= May
DST will end during the month of May
6= June
DST will end during the month of June
7= July
DST will end during the month of July
8= August
DST will end during the month of August
9= September
DST will end during the month of September
10= October (Default)
DST will end during the month of October
11= November
DST will end during the month of November
12= December
DST will end during the month of December
Device Comm.
RS232 Set Up
P1 and P2
P*061 Comms Baud
This parameter is used to set the speed (Baud Rate) of the RS232
communications and can be changed to suit the connecting device.
Default = 19200
RS 485 Set Up (Optional)
P1 and P2
Please refer to the relevant communications manual for availability of
parameters and details of options.