Pulsar ULTRA TWIN - Page 197

Page 189
P*974 Start Week
This parameter will determine the week of the month (P*975) in which
Daylight Saving Time is to start.
Option
Description
1= Week 1
DST will start on day (P*973) in the first week (P*974)
of the month (P*975).
2= Week 2
DST will start on day (P*973) in the second week
(P*974) of the month (P*975).
3= Week 3
DST will start on day (P*973) in the third week
(P*974) of the month (P*975).
4= Week 4
DST will start on day (P*973) in the fourth week
(P*974) of the month (P*975).
5= Last
(Default)
DST will start on day (P*973) in the last week (P*974)
of the month (P*975).
P*975 Start Month
This parameter is used to select the month, in which Daylight Saving Time
will start.
Option
Description
1= January
DST will start during the month of January
2= February
DST will start during the month of February
3=March (Default)
DST will start during the month of March
4= April
DST will start during the month of April
5= May
DST will start during the month of May
6= June
DST will start during the month of June
7= July
DST will start during the month of July
8= August
DST will start during the month of August
9= September
DST will start during the month of September
10= October
DST will start during the month of October
11= November
DST will start during the month of November
12= December
DST will start during the month of December
P*976 DST End Time
This parameter is used to set the time of day at which Daylight Saving
Time will end the time is entered in the format HH: MM (24-hour format).
Default = 02:00.