10–Converged Network Adapter Interactive Commands
10-2 SN0054667-00 C
This chapter uses a “breadcrumbs” line following most section headings that
shows how to access that option; that is, it shows the hierarchical path from the
top level to the command under discussion. For example, to reach the Flash
Update option for Converged Network Adapters from the Main Menu, select
option 3 to choose Adapter Updates, 1 to select the Converged Network
Adapter type, and then 1 to see the Flash Update option. The following shows
the breadcrumbs example:
3.
Adapter Updates
1. Converged Network Adapter
1. Flash Update
The Main Menu is as follows:
Main Menu
1: Adapter Information
2: Adapter Configuration
3: Adapter Updates
4: Adapter Diagnostics
5: Adapter Statistics
6: Refresh
7: Help
8: Exit
Please Enter Selection:
To Next Page
Loading...