Qlogic QConvergeConsole CLI 2400 Series User Manual

10–Converged Network Adapter Interactive Commands
CNA FCoE Information
10-16 SN0054667-00 C
Data Center Bridging
6. CNA FCoE Information<port selection>2. FCoE2. Data Center Bridging
From the FCoE Utilities Menu, select the Data Center Bridging option to view
data center bridging information. For example:
------------------------------------------------------
Data Center Bridging
------------------------------------------------------
Host Name : APPS4055
HBA Instance : 0
HBA Model : QLE8242
Node Name : 20-00-00-0E-1E-04-95-EB
Port Name : 21-00-00-0E-1E-04-95-EB
HBA Description : QLE8242 QLogic Pci Express to 10GbE Dual
Channel CNA (FCoE)
----------------------------
DCBX
These DCBX values are the default card/local settings.
To see the running/current settings, use the TLV option.
------------------------------------------------------
DCBX Enable : True
Willing : True
Port Pause Type : Per Priority Pause
SAN Priority COS : 3
----------------------------
ETS
These ETS values are the default/local settings.
To see the running/current settings, use the TLV option.
Unused bandwidth are excluded.
------------------------------------------------------
Priority Tx Mode : Bandwidth
SAN Bandwidth Percent : 50
SAN Unused Bw To LAN : False
LAN Unused Bw To SAN : False
DCE Statistics
6. CNA FCoE Information<port selection>2. FCoE3. DCE Statistics
From the FCoE Utilities Menu, select the DCE Statistics option to open the DCE
Statistics menu with options to display and configure DCE logging parameters.
For detailed information about these parameters, see Table 5-3.

Qlogic QConvergeConsole CLI 2400 Series Specifications

General

Brand	Qlogic
Model	QConvergeConsole CLI 2400 Series
Category	Software
Language	English