Qlogic QConvergeConsole CLI 2400 Series - Page 248

10–Converged Network Adapter Interactive Commands
CNA FCoE Configuration
10-44 SN0054667-00 C
Manual Configure LUNs
1. CNA FCoE Configuration6. Selective LUNs<port selection>2. Manual Configure LUNs
Select the Manual Configure LUNs option to open the Selective LUN Menu with
options to select a target device on which to enable or disable LUNs. Select a
target device, select the LUNs, and then enable or disable the LUNs. For
example:
Selective LUN Menu (Configuration)
=======================================================
CNA : 0 Port: 1
SN : AFE1028C03899
ENode MacAddr : 00:0E:1E:04:95:EB
CNA Model : QLE8242
CNA Desc. : QLE8242 QLogic Pci Express to 10GbE Dual Channel CNA (FCoE)
FW Version : 4.07.31
WWPN : 21-00-00-0E-1E-04-95-EB
WWNN : 20-00-00-0E-1E-04-95-EB
Link : Online
=======================================================
1: Disk
Vendor : DGC
Product ID : RAID 0
Port Name : 50-06-01-60-41-E0-63-25
Port ID : 11-00-EF
Bind : No
Target ID :
2: Device
Vendor : N/A
Product ID : N/A
Port Name : 20-70-00-C0-FF-D8-32-7F
Port ID : 00-00-00
Bind : Yes
Target ID : 0
(p or 0: Previous Menu; m or 98: Main Menu; ex or 99: Quit)
Please Enter Selection: 1
Selective LUN Menu (Configuration)
1: Disk
Vendor : DGC
Product ID : RAID 0
Port Name : 50-06-01-60-41-E0-63-25
Port ID : 11-00-EF
Bind : No
Target ID :
2: Device