10–Converged Network Adapter Interactive Commands
CNA iSCSI Configuration
SN0054667-00 C 10-61
BIOS/UEFI Settings Menu
2. CNA iSCSI Configuration2. Port Configuration<port selection>4. BIOS/UEFI Settings Menu
From the Port Link Configuration menu, select the BIOS/UEFI Settings Menu
option to open the BIOS/UEFI Settings Menu with options to view BIOS/UEFI
information, set the BIOS/UEFI mode, set primary and secondary boot target
information, clear primary and secondary boot information, set an alternative
client ID, save changes, and reset the adapter. For example:
BIOS/UEFI Settings Menu
=======================================================
CNA : 0 Port: 1
SN : AFE1028C03899
CNA Model : QLE8242
iSCSI Name : iqn.2000-04.com.qlogic:isp8214.000E1E0495EA.4
FW Version : 4.7.31
iSCSI MacAddr : 00:0E:1E:04:95:EA
IPv4 Address : 192.168.1.45
=======================================================
1: Display BIOS/UEFI Information
2: Set BIOS/UEFI Mode
3: Set Primary Boot Target Information
4: Set Secondary Boot Target Information
5: Clear Primary Boot Target Information
6: Clear Secondary Boot Target Information
7: Set Alternatve Client ID
8: Save changes
9: Save changes and reset HBA (if necessary)
Display BIOS/UEFI Information Select this option to view the BIOS/UEFI
information.
Set BIOS/UEFI Mode Select this option to set the BIOS/UEFI mode.
To Next Page
Loading...
Need help?
General
