Qlogic QConvergeConsole CLI 2400 Series User Manual

10–Converged Network Adapter Interactive Commands
CNA iSCSI Configuration
10-66 SN0054667-00 C
Target Configuration
2. Adapter Configuration1. CNA Configuration2. CNA iSCSI Configuration4. Target Configuration
From the Converged Network Adapter (CNA) iSCSI Configuration menu, select
the Target Configuration option. Select a port from the port menu to open the
Target Configuration menu with options to manage targets. For example:
Converged Network Adapter (CNA) iSCSI Configuration
CNA Model QLE8242 SN: AFE1028C03899
1. Port 2 [Protocol(s): NIC iSCSI FCoE]
MAC Address: 00:0E:1E:04:95:EC
WWPN: 21-00-00-0E-1E-04-95-EF
Port iSCSI Name: iqn.2000-04.com.qlogic:isp8214.0 SFP not installed
2. Port 1 [Protocol(s): NIC iSCSI FCoE]
MAC Address: 00:0E:1E:04:95:E8
WWPN: 21-00-00-0E-1E-04-95-EB
Port iSCSI Name: iqn.2000-04.com.qlogic:isp8214.0 Online
(p or 0: Previous Menu; m or 98: Main Menu; ex or 99: Quit)
Please Enter Selection: 2
Target Configuration
=======================================================
CNA : 0 Port: 1
SN : AFE1028C03899
CNA Model : QLE8242
iSCSI Name : iqn.2000-04.com.qlogic:isp8214.000E1E0495EA.4
FW Version : 4.7.31
iSCSI MacAddr : 00:0E:1E:04:95:EA
IPv4 Address : 192.168.1.45
=======================================================
1: List Targets
2: Display Target Information
3: Bind Target
4: Delete Target
5: Configure Target Parameters
6: Add A Target
7: Disable a Target
8: Enable a Target
9: Configure Target Authentication Menu
10: Target Discovery Menu
11: List LUN information
12: Save Target/CHAP Changes
13: Refresh

Qlogic QConvergeConsole CLI 2400 Series Specifications

General

Brand	Qlogic
Model	QConvergeConsole CLI 2400 Series
Category	Software
Language	English