Qlogic QConvergeConsole CLI 2400 Series - Page 272

10–Converged Network Adapter Interactive Commands
CNA iSCSI Configuration
10-68 SN0054667-00 C
Display Target Information
2. CNA iSCSI Configuration4. Target Configuration<port selection>2. Display Target Information
Select the Display Target Information option to view target device information.
For example:
Enter a Target ID:3
Target ID: 3 hba_no: 1 IP: 192.168.1.11 Port: 3260 TGT Instance #: 3
ISCSI Name: iqn.1992-04.com.emc:cx.apm00103600607.b2
Alias: 0607.b2
State: Session Active
TGT_iSCSI_Name : iqn.1992-04.com.emc:cx.apm00103600607.b2
TGT_Target_ID : 3(*)
TGTO_Active : off(*)
TGTO_Access_Granted : off(*)
TGTO_Target_Entry : on(*)
TGTO_Initiator_Entry : off(*)
TGT_RetryCount : 0(*)
TGT_RetryDelay : 0(*)
TGT_DevType : 0(*)
TGT_ExeThrottle : 0
TGT_FirstBurstLen : 128
TGTIPO_Fragmentation : on(*)
.
.
.
Bind Target
2. CNA iSCSI Configuration4. Target Configuration<port selection>3. Bind Target
Select the Bind Target option to bind a target device.