10–Converged Network Adapter Interactive Commands
CNA iSCSI Configuration
SN0054667-00 C 10-73
Display Targets Using CHAP Entries Select this option to view targets that are
configured for CHAP. For example:
------------------------------------------------------------------
Targets configured for CHAP:
Target ID: 3 IP: 192.168.1.11 Port: 3260
ISCSI Name: iqn.1992-04.com.emc:cx.apm00103600607.b2
Alias: 0607.b2
Name: chap_target3
Secret: z1x2c3v4b5n6
------------------------------------------------------------------
Assign a CHAP Entry to a Target Select this option to assign a CHAP entry to a
target device. For example:
Target ID: 3 hba_no: 1 IP: 192.168.1.11 Port: 3260 TGT Instance #: 3
ISCSI Name: iqn.1992-04.com.emc:cx.apm00103600607.b2
Alias: 0607.b2
State: Session Active
Target ID: 4 hba_no: 1 IP: 192.168.1.10 Port: 3260 TGT Instance #: 4
ISCSI Name: iqn.1992-04.com.emc:cx.apm00103600607.a2
Alias:0607.a2
State: Session Active
Enter a Target ID: 3
CHAP TABLE
Entry: 1
Name: chap_target1
Secret: q1w2e3r4t5y6
Entry: 2
Name: chap_target2
Secret: a1s2d3f4g5h6
Entry: 3
Name: chap_target3
Secret: z1x2c3v4b5n6
CHAP Entry Number (0 for no CHAP) : 3
Do you want to have bidi authentication? [y/n]: y
Add a CHAP entry Select this option to add a CHAP entry. For example:
CHAPName [] :chap_target1
CHAPSecret [] :q1w2e3r4t5y6
Set CHAP as Bidi entry [off] :
To Next Page
Loading...