Qlogic QConvergeConsole CLI 2400 Series User Manual

10–Converged Network Adapter Interactive Commands
CNA NIC Configuration
SN0054667-00 C 10-91
Display VLAN Information
3. CNA NIC Configuration3. VLAN Configuration2. Display VLAN Information
From the Configure VLANs Menu, select the Display VLAN Information option to
view the VLAN information. For example:
VLAN(s) Information:
Updating VLANs info ...
Done ...
Available VLAN ID(s):
300, 0
Select VLAN ID: (or ALL) : 0
***** VLAN: 0 ([Default Vlan][VLan Team]:QLogic Teaming Virtual Adapter) *****
Driver Name : QLogic Teaming Virtual Adapter
Driver Version : 4.2.15.1125
Driver Date : 11-25-2010
VLAN Enabled : Enabled
VLAN ID : 0
MAC Address : 00:0e:1e:04:95:ec
MTU : 1514
IPv4 Address : 169.254.96.35
Subnet Mask :
IPv6 Address : fe80::7813:c633:a75:6023
Link Status : Down
Updating parameters ... Plese wait ...
Configurable Properties:
========================
IFP_Jumbo_Packet_Size : 1514
IFP_LSO_IPv4_V1 : Enabled
IFP_LSO_IPv4_V2 : Enabled
IFP_LSO_IPv6_V2 : Enabled
IFP_Checksum_Offload_IPv4 : RX and TX Enabled
IFP_UDP_Checksum_Offload_IPv4 : RX and TX Enabled
IFP_TCP_Checksum_Offload_IPv4 : RX and TX Enabled
IFP_UDP_Checksum_Offload_IPv6 : RX and TX Enabled
IFP_TCP_Checksum_Offload_IPv6 : RX and TX Enabled
IFP_Large_RECV_Offload : Enabled
IFP_RSS : Enabled
User_Assigned_Name :

Qlogic QConvergeConsole CLI 2400 Series Specifications

General

Brand	Qlogic
Model	QConvergeConsole CLI 2400 Series
Category	Software
Language	English