10–Converged Network Adapter Interactive Commands
CNA NIC Configuration
10-96 SN0054667-00 C
Display Team Information
3. CNA NIC Configuration4. Team Configuration2. Display Team Information
From the Configure Teams Menu, select the Display Team Information option to
view team information. For example:
Team Index: 1 Team Description: [Default Vlan][Team 2]:QLogic Teaming Virtu
Select Team Index (or ALL) : 1
***** Team: [Default Vlan][Team 2]:QLogic Teaming Virtual Adapter #3 ******
Team Description: [Default Vlan][Team 2]:QLogic Teaming Virtual Adapter #3
Team Type : Fail Over
Driver Name : QLogic Teaming Virtual Adapter
Driver Version : 4.2.15.1125
Driver Date : 11-25-2010
VLAN Enabled : Disabled
VLAN ID : None
MAC Address : 00:0e:1e:04:95:e8
MTU : 1514
IPv4 Address : 169.254.247.129
Subnet Mask : 255.255.0.0
IPv6 Address : fe80::a8af:6f72:3a1e:f781
Link Status : Up
Primary Member : QLogic Dual Port 10 Gigabit Ethernet CNA, PCIe 2.0 Adapter
Updating parameters ... Plese wait ...
Configurable Properties:
========================
IFP_Jumbo_Packet_Size : 1514
IFP_LSO_IPv4_V1 : Enabled
IFP_LSO_IPv4_V2 : Enabled
IFP_LSO_IPv6_V2 : Enabled
IFP_Checksum_Offload_IPv4 : RX and TX Enabled
IFP_UDP_Checksum_Offload_IPv4 : RX and TX Enabled
IFP_TCP_Checksum_Offload_IPv4 : RX and TX Enabled
IFP_UDP_Checksum_Offload_IPv6 : RX and TX Enabled
IFP_TCP_Checksum_Offload_IPv6 : RX and TX Enabled
IFP_Large_RECV_Offload : Enabled
IFP_RSS : Enabled
User_Assigned_Name : Team 2
VT_MODE : Fail Over
Failback_Mode : Best available
Failback_Delay : 3
To Next Page
Loading...
Need help?
General
