Qlogic QConvergeConsole CLI 2400 Series - Page 305

10–Converged Network Adapter Interactive Commands
CNA NIC Configuration
SN0054667-00 C 10-101
Set Primary Team Member
3. CNA NIC Configuration4. Team Configuration8. Set Primary Team Member
From the Configure Teams Menu, select the Set Primary Team Member option
to set the primary team member. For example:
Team Index: 1 Team Description: [Default Vlan][Team 2]:QLogic Teaming Virtual
Adapter #3
Select Team Index : 1
Team Members:
CNA: 1 CNA Port: 1 MAC: 00:0e:1e:04:95:e8 Description: "QLogic Dual Port 10
Gigabit Ethernet CNA, PCIe 2.0 Ada
pter"
Current selection:
Team : [Default Vlan][Team 2]:QLogic Teaming Virtual Adapter #3
Primary : QLogic Dual Port 10 Gigabit Ethernet CNA, PCIe 2.0 Adapter
Team Members valiable for selection:
2. Description: QLogic Dual Port 10 Gigabit Ethernet CNA, PCIe 2.0 Adapter
Member selected as Primary: QLogic Dual Port 10 Gigabit Ethernet CNA, PCIe 2.0
Adapter
Saving team: [Default Vlan][Team 2]:QLogic Teaming Virtual Adapter #3
About to save team config. Please wait ...
Successfully saved extended parameters.