Radwin 5000 HPMP - Page 164

RADWIN5000HPMPUserManual Release3.5.70 8‐9
Management
4.ClickOKtosaveyourchoice.
Notethatforeachactivetrapdestination,theClearTrapDestinationbuttonisenabled:
VLANforManagement
ManagementVLANConfiguration
Figure8‐1:VLANforManagement
VLANManagementenablesseparationofusertrafficfrommanagementtrafficwhenever
suchseparationisrequired.Itisrecommendedthateachmemberofasectorbeconfigured
withdifferentVLANIDsformanagementtraffic.(Thisreducesyourchancesofaccidentally
lockingyourselfoutof
thesector.)
 ToenableVLANformanagement:
1.InthewindowofFigure 8‐1,checktheEnabledbox.
2.EnteraVLANID.Itsvalueshouldbebetween2and4094.
AfterenteringtheVLANID,onlypacketswiththespecifiedVLANIDareprocessed
formanagementpurposesbytheHBS/HSUODU.Thisincludes
alltheprotocolssup‐
portedbytheODU(ICMP,SNMP,TelnetandNTP).UsingVLANformanagementtraf‐
ficaffectsalltypesofmanagementconnections(local,networkandovertheair).
3.EnteraPrioritynumberbetween0and7.
Caution
VLANIDsareusedbyRADWINproductsinthreeseparatecontexts:
ManagementVLAN,TrafficVLANandEthernetRing.Itisre commendedthat
youusedifferentVLANIDsforeachcontext.