Rain Bird Maxicom2 User Manual

Using the Weather Source Wizard for Interactive
Setup
To use the Weather Source wizard:
1 Select the New option from the Weather menu.
Or
If you have a weather source already open, select the Configure option from
the Weather menu.
The weather source wizard begins to run automatically. The Wizard dialog box
is displayed, giving information about how the wizard works.
Weather Source Wizard
2 Follow the instructions in the wizard. If you need more help, read “Using the
Weather Source Properties Setup Dialog Box for Setup” on the next page.
3 After finishing each section of the wizard, click the Next button.
The next section of the wizard will be displayed.
4 When you have finished the last section of the wizard, click the Finish button.
Weather source setup is completed and your work is saved.
Setting Weather Source Properties
5.2
If you want to change
direction or cancel the
wizard at any time, click the
Back button to return to the
previous section, or click the
Cancel button to cancel the
wizard entirely.

Rain Bird Maxicom2 Specifications

General

Brand	Rain Bird
Model	Maxicom2
Category	Control Systems
Language	English