Modifying the ET or Rainfall
You can modify the ET and Rainfall for a specific day. This information will apply
only to the day you select. The other site values for ET and rainfall will remain the
same.
To modify the ET or rainfall:
Enter the date in the Modify for field or use the scroll buttons on the right of
the field to select a date without typing. Enter the date in the format
07/11/1999.
Viewing and Editing a Site’s Event Data
The Event sheet displays a calendar for the open site. The calendar is displayed
based upon the current date, but you can scroll forward to the first month of the
next calendar year or back to the last month of the previous calendar year.
To view and edit event data:
1
With the Site window open, select the Event tab.
The Event sheet comes to the front of the stack.
Event Sheet
2
If necessary, make changes to the sheet, as described in this section.
3
When you are finished viewing and editing event data, you can select another
tabbed sheet, close the Site window, or leave the Site window open while you
work in another area of Maxicom
2
.
Viewing and Editing Site Data
7.15
To Next Page
Loading...
