Rain Bird Maxicom2 User Manual

To save the work you have done:
Click the OK button on the window or dialog box in which you are working to
save your work and close the window or dialog box. Or, click the Apply button
on the window or dialog box in which you are working to save your work
without closing the window or dialog box.
Canceling Your Work
All of the dialog boxes and wizards in which you can enter text in Maxicom
2
have
Cancel buttons that allow you to cancel the work you have done since you
opened the dialog box or wizard. Site windows and Weather Source windows
allow you to select the Abandon Changes option to cancel changes.
To cancel the work you have done in a dialog box or wizard:
Click the Cancel button or, if you are working in a Site or Weather Source
window, select the Abandon Changes option from the Site menu or Weather
menu.
The window or dialog box reverts to the state in which it was last saved.
Exiting the Maxicom
2
Interface
It is not necessary to run the Maxicom
2
interface for the Maxicom
2
controls to
run; only the application needs to be active. This means that you do not have to
dedicate a computer to Maxicom
2
. You can do word processing or other tasks
while Maxicom
2
runs in the background.
To exit the interface:
Select the Exit option from the System menu, double-click the Maxicom
2
icon
on the application title bar, or click the Close button on the application title
bar.
The interface closes and your work is saved.
Turning Maxicom
2
Control Off and On
To turn off Maxicom
2
control:
1 Right-click the Rain Bird icon in the tray at the right bottom corner of your
screen.
The Rain Bird icon menu is displayed.
Getting to Know Maxicom
2
2.36
To back up Maxicom
2
data,
see “Backing Up Data” on
page 11.1.
If you close the entire
interface, Maxicom
2
automatically saves your
changes.

Rain Bird Maxicom2 Specifications

General

Brand	Rain Bird
Model	Maxicom2
Category	Control Systems
Language	English