Rain Bird Maxicom2 User Manual

Setting Site FLO-MANAGER Properties
Maxicom
2
’s FLO-MANAGER allows your system to run at peak efficiency by
determining the best sequence for operation, based upon the hydraulic capacity
of the system. You set up the FLO-MANAGER by specifying a point of connection
capacity then creating one or more flow zones that use the point of connection(s).
Maxicom
2
then calculates the best sequence for the schedule operations you
program. You can create up to 20 FLO-MANAGER flow zones.
To set FLO-MANAGER properties for the site:
1 With the Site Properties Setup dialog box open, select the FLO-MANAGER tab.
The FLO-MANAGER sheet comes to the front of the stack.
FLO-MANAGER Sheet
2 Set the FLO-MANAGER properties as described in this section.
3 When you are finished setting FLO-MANAGER properties, you can select
another tabbed sheet or click OK to save changes and close the dialog box,
Apply to save changes without closing the dialog box, or Cancel to cancel
changes and close the dialog box.
Setting Site Properties
4.13
To delete a flow zone, click
on the zone to select it and
then click on the Delete
button.

Rain Bird Maxicom2 Specifications

General

Brand	Rain Bird
Model	Maxicom2
Category	Control Systems
Language	English